Suspension Types
	Secure-Fit Ratchet System The Best Fitting Adjustment Available   The unique swivel feature allows the ratchet to fit low on the nape and adjust for a perfect fit. The "Secure-Fit" ratchet features an easy turn knob that allows adjusting for a perfect fit without removing the helmet. Each turn of the ratchet knob automatically locks the adjustment with 50 meshing teeth. The no-slip hold maintains the desired fit even in the most physically active jobs or extreme weather conditions. Provides a secure and comfortable fit. The hinged ratchet fits low on the nape of the neck and adjusts for a perfect fit. The ratchet is cushioned with a thick sponge padding for long lasting comfort. Built in goggle retainer clips. Adjusts to over 40 different head sizes, 6 1/2 - 8.
	Quick-Slide Adjustment   The most effective non-ratchet adjustment system available. To tighten, simply slide to appropriate head size. Can be adjusted while worn. To loosen, simply pinch and pull open. Low nape strap provides excellent fit. Built in goggle retainer clips. Head sizes 6 1/2 - 8.
Head Protection
GLO-MEGA™ TYPE 1 & 2 Class E Certified   THE ONLY GLOW-IN-THE-DARK HARD HAT Certified to the "NEW CSA Z94.1-05" standard as a Type 1 Class E (Crown Impact/Penetration only) and Type 2 Class E (Crown & Lateral Impact/Penetration). CSA Type 1 also meets ANSI Z89.1-2003 Type I Class C, E, G requirements. Allows others to visually locate a wearer in a dark environment without a light source. Illumination visible for over 48 hours. Charging for 10 to 20 minutes in sunlight is excellent. A half hour in bright fluorescent light is good. 20 Minutes near a 40 w incandescent bulb will generate a significant glow. The Glo-MegaTM has the normal life span of a molded polyethylene safety helmet. The photoluminescent properties, however, should last almost indefinitely. Available suspensions: Quick Slide and Secur Fit Ratchet. Molded from high density polyethylene for maximum protection and comfort. Comfortable, impact-absorbing suspensions, Type 1-6-point, Type 2-4 point. Featuring a sleek, ribbed and well balanced, low profile design that provides incredible stability. Accessory slots accommodate a wide variety of eye, face and hearing protection products. Chin strap attachments accomodate most chin strap styles. Cushioned brow pad absorbs moisture to help keep wearer cool and comfortable. Brow pad removable and washable. Weight - CSA Type 1 standard adjustment 13.7 oz/389 grams, ratchet adjustment 14.6 oz/413 grams. CSA Type 2 standard adjustment 15.7 oz/445 grams, ratchet adjustment 16.5 oz/469 grams. Built in goggle retainer clips. Made in America.
	OMEGA II® TYPE 1 Class E Certified, ANSI TYPE I   Certified to the "NEW CSA Z94.1-05" standard as a Type 1 Class E (Crown Impact/Penetration only). Also meets ANSI Z89.1-2003 Type I Class C, E, G requirements. Featuring a sleek, ribbed and well balanced, low profile design that provides incredible stability. Molded from high density polyethylene for maximum protection and comfort. Accessory slots accommodate a wide variety of eye, face and hearing protection products. Chin strap attachments accomodate most chin strap styles. Cushioned brow pad absorbs moisture to help keep wearer cool and comfortable. Brow pad is removable, washable and replaceable. Comfortable, impact-absorbing, 6-point woven nylon suspension Available suspensions: "Quick Slide" sizing adjustment and "Secur Fit Ratchet" suspensions fits head sizes 6 1/2 - 8 Softer band material conforms to wearer's head for more comfortable fit and allows for easier size adjustment. Weight - standard adjustment 13.4 oz/379 grams, ratchet adjustment 14.2 oz/403 grams. Built in goggle retainer clips. CSA Reverse Headband certified. Made in America. Colours:
	OMEGA II® TYPE 2 Class E Certified   Certified to the "NEW CSA Z94.1-05" standard as a Type 2 Class E (Crown & Lateral Impact/Penetration). Molded from high density polyethylene for maximum protection and comfort. Featuring a sleek, ribbed and well balanced, low profile design that provides incredible stability. Accessory slots accommodate a wide variety of eye, face and hearing protection products. Chin strap attachments accomodate most chin strap styles. Cushioned brow pad absorbs moisture to help keep wearer cool and comfortable. Brow pad is removable, washable and replaceable. Comfortable, impact-absorbing, 4 point woven nylon suspension. Available suspensions: "Quick-Slide" sizing adjustment and "Secur Fit Ratchet" suspension fits head sizes 6 1/2 - 8. Softer band material conforms to wearer's head for a more comfortable fit and allows for easier size adjustment. Weight - standard adjustment 15.3 oz/435 grams, ratchet adjustment 16.2 oz/459 grams. Built in goggle retainer clips. CSA Reverse Headband certified. Made in America. Colours:
	LIBERTY™ TYPE 1 Class E Certified, ANSI Type I   Certified to CSA Z94.1-05 standard as Type 1 Class E. Meets ANSI Type 1 crown impact & penetration protection. Reverse Headband Certified. Molded from lightweight, high density polyethylene. Features a short peak and trim profile & functional rain trough. Accessory slots accommodate a wide variety of eye, face and hearing products. Accommodates chin strap. Goggle retaining slots on suspension. Brow pad is removable, washable and replaceable. Cushioned brow pad absorbs moisture. Comfortable, 4-point woven nylon suspension. Soft Band material conforms to wearer's head for a comfortable fit and allows for easier size adjustment. Made in America. Hat Weight: Standard Suspension 12.38 oz./ 351 grams, Ratchet 13.26 oz./ 376 grams. Colours:
	OMEGA II® FULL BRIM TYPE 1 Class E Certified, ANSI Type I   Certified to the "NEW CSA Z94.1-05" standard as a Type 1 Class E (Crown Impact/Penetration only). Also meets ANSI Z89.1-2003 Type I Class C, E, G requirements. Chin strap attachments accomodate most chin strap styles. Cushioned brow pad absorbs moisture. Brow pad is removable, washable, and replaceable. Comfortable, impact-absorbing, 6-point woven nylon suspension. Available suspensions: "Quick-Slide" sizing adjustment and "Secur Fit Ratchet" suspensions fit head sizes 6 1/2 - 8. Low nape strap helps eliminate unnecessary shifting on the wearer's head. Softer band material conforms to wearer's head for a more comfortable fit and allows for easier size adjustment. Built in goggle retainer clips. Made in America. Colours:
	#67 BUMP CAP   Ideal for protecting head from lacerations, minor bumps and bruises in areas that do not require certified safety helmets. Molded from high density polyethylene. Perforated sides allow cross ventilation for maximum air circulation. Cushioned brow pad absorbs moisture. Brow pad is removable, washable and replaceable. 4-point injection molded suspension. "Pin-Lock" sizing adjusts from head sizes 6 1/2 - 7 3/4. Designed for use in industries such as automotive, pest control, meat packing, food processing and assembly facilities. Caution: Bump caps are not designed to protect against impact from falling or glancing objects. Does not meet CSA or ANSI requirements. Made In America. Colours:
S6 SWEATBAND Highly absorbent cellulose sponge Economically priced for single use application Durable enough for reuse CHIN STRAP Durable soft cotton blend elastic Provides comfort and control in windy conditions Attaches to the ERB Safety Liberty, Omega II, and Omega II Full Brim suspensions Made in USA CHIN STRAP with GUARD Elastic strap with slider size adjustment Plastic contoured chin cup slides to offer secure fit and comfortable protection Attaches to ERB Safety Omega II and Omega II Full Brim Hat IMPRINTED HARD HAT Pad printing available - call for quote
ANTI-GLARE GUARDS Dark green opaque guard prevents sunlight glare Self-adhesive material Customized to fit under the brim of all ERB Safety helmets Made in USA UTILITY HELMET CLIP Clip fits into accessory slots of helmets 4 grooves to accommodate tools and accessories Allows hard hat wearers to have tools within close reach Clip is low profile, lightweight and easy to use Clip sold separately. Tools not included HARD HAT PENCIL CLIP Adhesive backed clip holds pencils, pens & carpenter pencils Colors available: Red, White, Blue, Yellow and Orange Can be imprinted - call for quote Imprint size: 1" x 1" BROW PAD Blue foam brow pad is featured in each ERB Safety helmet and bump cap. Cushioned brow pad absorbs moisture. Brow pad is removable, washable and replaceable. Made in USA. SUN SHIELD OMEGA II/OMEGA II FULL BRIM Adds additional UV protection. Opaque covering. See through smoke colored front for overhead visibility. AS5E fits only Omega II helmet/ AS4E fits only Omega II Full Brim hat. CLOTH NECK SHIELD Conveniently loops around helmet suspension with metal grommets. Hangs freely to protect from sun and heat. Made of white 100% cotton fabric. Dimensions: 15" W x 11 1/2" L. Made in USA. 360° ANSI REFLECTIVE STRIPS Self-adhesive Reflexite retroreflective material. Measurements: 1/2" W x 22" L. Curved shape to fit safety helmet. Exceeds the minimum reflectivity requirements of the proposed ANSI/ISEA 107-2004 for high-visibility head protection. Available in Lime, Orange, and White. Assembly on hats available. REFLECTIVE STRIPS High visibility, excellent for night workers. For placement on all sides of helmets. Dimensions: 1" W x 4" L. Available in Fluorescent Lime, Orange or Silver. Assembly on hats available. EYEWEAR CLIP Adheres to safety helmet with durable adhesive. Holds any style eyewear. Can also be used to hold pencils, ruler or anything that needs easy access. Available in Black, White, Yellow and Hi-Viz Orange. Can be imprinted - Call for quote.
Dentec Safety Specialists, Inc. 210 Pony Drive, Unit 2, Newmarket, ON L3Y 7B6 tel: 905-953-9946 - fax: 905-953-8351 e-mail: dentec@dentecsafety.com Copyright, 2006 Dentec Safety Specialists, Inc. JavaScript DHTML Drop Down Menu By Milonic