DHTML JavaScript Website Pull Down Navigation Menu By Milonic Dentec Safety Specialists, Inc.

NEW MATERIAL TECHNOLOGY THAT OUT PERFORMS THE COMPETITION   

Enviroguard

Enviroguard

The world's first standardized and calibrated "full body protective filtration garment" to protect against heat build up and dangerous noxious particles.

Calibrated for > 99%+ retention of 0.3 micron particles with an efficiency similar to an N95 respirator. There is no other product like it!

The first material to offer a filtration rating similar to particulate style respirators 95+. The Body Filter 95+ will provide "keep out" dry particulate protection while providing 125 times more breath-ability than the leading brand. The breath-ability greatly reduces heat build inside the suit providing extended comfort for prolonged use.

Body Filter 95+ incorporates the highest quality in electrostatically charged filter media into a superior filtration system. Exceptional abrasion resistance is provided by a unique aperture molded hard plastic polymer grid on the surface. An interior silky smooth skin contact surface wicks moisture away from the body.

A new level in demonstrable protection and comfort...

  Air Permeability*
(cfm) @ 20Pa
Pressure
Drop **
Penetration *
%
Spunbounded Polyolefin 0.065 27 0.067
Body Filter 95+ ™ 8.65 0.22 0.0548

* Tested on Textest in accordance with ASTM D737 (20 Pa)

** Tested on TSI 8130 at a flow rate of 2.3 liters/min, 100cm2 filter area using a sodium chloride aerosol having a mean particle size of 0.3 microns.

Assured removal of 0.3 micron particles rated far above 95%. More than 120 times air flow permeability when compared to the Calendared Polyolefin Fabric. Exceptional fabric strength with superior abrasion resistance.

Typical particulate size measurement for dangerous and noxious materials:

Bromine : 0.1 - 0.7
Carbon Black : 0.2 - 0.9
Asbestos : 0.3 - 100
(Source: Relative Particle Size Chart, fig.1.3, NAFA Guide to Air Filtration)

Available Garments
Enviroguard #4017
White Standard Coverall. Elastic Wrists & Ankles.
Enviroguard #4028
White Coverall. Attached Hood, Elastic Wrists & Ankles.
Enviroguard #4014
White Coverall. Attached Hood & Boot, Elastic Wrists & Ankles.


NEW MATERIAL TECHNOLOGY THAT OUT PERFORMS THE COMPETITION   

Enviroguard

Enviroguard

Utilizes state-of-the-art lamination technology to combine a soft non-woven fabric with micro porous film. This technology allows us to offer a fabric with superior liquid barrier, better particulate barrier, stronger tear resistance and lower lint then other fabrics. An excellent alternative to Tyvek®, KleenGuard® XP, and MicroMax. MicroGuard Plus offers superior worker comfort yet it is also strong and durable.

MicroGuard MP™ is for use in, but not limited to:

  • Handling and applying granular powder or dust pesticides
  • Fiberglass manufacturing and installation
  • Industrial, research, and clinical facilities
  • Pharmaceutical and food processing
  • Woodworking and furniture manufacturing
  • Construction, and asbestos abatement sites

* As always, it is the user's responsibility to determine the proper protective apparel required for each application, since conditions of use are outside our control.

Physical Properties
Property Unit Microguard
MP™ Result
KleenGuard® XP
Result
TYVEK® Method
MD Tensile Strength lbf/in 31.5 30.6 24 ASTM D5034
CD Tensile Strength lbf/in 17.3 21.4 17.5 ASTM D5034
MD Elongation % 85 72 31 ASTM D5034
CD Elongation % 102 89 23 ASTM D5034
MD Tear Strength lbf/in 13.0 11.0 6.2 INDA IST 100.2
CD Tear Strength lbf/in 7.1 7.2 5.2 INDA IST 100.2
Hydrohead cmHO 171 187 112 AATCC 127
Flammability   Class 1 Class 1 Class 1 CPSC 1610

Test Method Result
Fabric Weight (g/m2) GB/T 4669-1995 60.2
Water Vapor Transmission (g/m2 24h) GB/T 12074-1991 1500
Water Resistance (Kpa) FZ/T 01004-1991 18.8
Flat Abrasion FZ/T 01004-1991 198
Breaking Strength (N/5cm) GB/T 3923.1-1997 Radial: 70 - Woof: 50

Chemical Resistance
Test Method Result
Bleach 5% ASTM T903 Pass
Hydraulic Jack Oil ASTM T903 Pass
Isocyanate Based Paint Hardener ASTM T903 Pass
Motor Oil ASTM T903 Pass
Sodium Hydroxide ASTM T903 Pass
Mineral Oil ASTM T903 Pass

Available Garments
Enviroguard #8013
White Coverall. Elastic Wrists & Ankles.
Enviroguard #8015
White Coverall. Attached Hood, Elastic Wrists & Ankles.
Enviroguard #8019
White Coverall. Attached Hood & Boot, Elastic Wrists & Ankles.
Enviroguard #8200
Pants. Elastic Waist.
Enviroguard #8201
Shirt Long Sleeve. 5 Snaps.
Enviroguard #8024
White Lab Coat. No Pockets, Open Wrists.
Enviroguard #8002
Hood Elastic Face, Covers Shoulders.
Enviroguard #8065
18". Elastic Ends.
Enviroguard #802448
Apron.
Enviroguard #8101
Shoe Cover.
Enviroguard #8102
17" Boot/Shoe Cover.
Enviroguard #8106
17" Boot/Shoe Cover w/Vinyl Sole.


NEW MATERIAL TECHNOLOGY THAT OUT PERFORMS THE COMPETITION   

Enviroguard

Enviroguard

CHEMSPLASH™ has been tested for penetration resistance by exposure under pressure to the following list of hazardous chemicals (ASTM 1001) in accordance with ASTM Test Method 903.

CHEMSPLASH™ combines the economy of microporous technology with a revolutionary process of creating a surface augmented with a micro membrane over the pores. The result Hybrid Breathable Membrane System is a transformed barrier which retains "breathability" but becomes highly penetration resistant (ASTM 903) to a broad group of dangerous, noxious and poisonous chemicals (ASTM101).

CHEMSPLASH™ is the first protective material to incorporate barrier resistance to penetration by dangerous chemicals for incidental and accidental chemical splash while providing continuous outward moisture vapor transmission to minimize the potential for heat stress.

CHEMSPLASH™ is created by a proprietary process (patent pending) where a new monolithic membrane is created on top of the pores of the microporous membrane which services as a base for the new Miro-Monolithic Hybrid Membrane.

The fabric and garment is not for use with some chemicals and hazardous agents and it is the user's responsibility to determine the level of risk and the proper personal protection needed.

A new level in demonstrable protection and comfort...

10 minutes at 2 psig:
Chemical Micro Porous ChemSplash™
Methanol Fail Pass
Aceton Fail Pass
Acetone Fail Pass
Diethylamine Fail Pass
Ethyl Acetate Fail Pass
Dimethylformamide Fail Pass
Dichloromethane Fail Pass
Tetrachloroethylene Fail Pass
Nitrobenzene Fail Pass
Hexane Fail Pass
Detergent Formula 409 Fail Pass

Available Garments
Enviroguard #7012T
White Coverall. Open Wrists & Ankles & Taped Seams.
Enviroguard #7013T
White Coverall. Elastic Wrists & Ankles & Taped Seams.
Enviroguard #7015T
White Coverall. Attached Hood, Elastic Wrists & Ankles & Taped Seams.
Enviroguard #7019T
White Coverall. Attached Hood & Boot, Elastic Wrists & Ankles & Taped Seams.


NEW MATERIAL TECHNOLOGY THAT OUT PERFORMS THE COMPETITION   

Enviroguard

Enviroguard

SMS provides worker comfort and additional protection in the workplace. Made of a 60 GSM fabric, provides exceptional strength and durability. SMS is breathable providing superior comfort while acting as an excellent particulate barrier as well as a barrier to light splashes and sprays.

  • General Clean-up Work
  • Asbestos and Lead Abatement
  • Mold Remediation
  • Manufacturing
  • Assembly Operations
  • Laboratories
  • Printing
  • Dirt, dust, grime environments

Property Unit Average Min
Value
Indiv
Max
Value
Indiv
Method
Basis Weight gsm 60.0     ASTM D3776
Grab Tensile (MD) lbf 28.64 28.02 29.51 ASTM D5034
Grab Tensile (CD) lbf 23.14 22.58 24.08 ASTM D5034
MD Elongation % 35.43 34.05 38.16 ASTM D5034
CD Elongation % 59.11 50.76 65.86 ASTM D5034
Trapezoidal Tear (MD) lbf 13.97     INDA IST 100.2
Trapezoidal Tear (CD) lbf 10.50     INDA IST 100.2
Air Permeability cfm 81.80 78.80 86.20 ASTM D737

Available Garments
Enviroguard #2223
White Coverall. Elastic Wrists & Ankles.
Enviroguard #2225
White Coverall. Attached Hood, Elastic Wrists & Ankles.
Enviroguard #2227
White Lab Coat. 1 Chest Pocket, Open Wrists.


NEW MATERIAL TECHNOLOGY THAT OUT PERFORMS THE COMPETITION   

Enviroguard

Enviroguard

PyroGuard™ FR garments are made with a tough, breathable, light weight, and cloth-like material with a base fabric of hydro entangled wood pulp and polyester topically treated with a phosphate-based flame retardant chemical. This combination of flame retardant chemistry and wood pulp causes the fabric to char at temperatures below the fabric's ignition point. This action deprives flames with a fuel source and provides a rigid structure for the component polymers to adhere to. The result is no flaming or molten drip.

General Physical Properties Test Method Results
Basis Weight PFG Method 2.35 oz./yd.2
Grab/Tensile ASTM D1117/D1682  
MD   26.7 lbs.
XD   20.7 lbs.
Trap Tear ASTM D1117D1682  
MD   7.1 lbs.
XD   10.1 lbs.
Spray Rating AATCC 22 51
Mullen Burst (lb./sq.in.) ASTM D3786-87 29
Oil Repellency IST 80.8 4

Thermal Properties Test Method Results
Vertical Flammability NFPA 701 1989 Small Scale
NFPA 701 1999
Pass
Pass
Char Length MD   4.9
Char Length XD   4.7
After Flame (sec)   < 2.0
Thermal Protective Performance NFPA1971-97  
(TTP) Spaced   3.8
Thermal Mannequin Test ASTM F1930 - 3.5 sec. 17%
% Body Burn Over Nomex IIIA garment  
  6.0 oz./yd2, Heat Flux = 2.0 CLL/CM2  

Available Garments
Enviroguard #9012
Blue Coverall. Elastic Wrists & Ankles.
Enviroguard #9015
Blue Coverall. Attached Hood, Elastic Wrists & Ankles.
Enviroguard #9019
Blue Coverall. Attached Hood & Boot, Elastic Wrists & Ankles.


NEW MATERIAL TECHNOLOGY THAT OUT PERFORMS THE COMPETITION   

Polypropylene is a lightweight, breathable fabric that provides economical protection for various work environments. Polypropylene is appropriate for use in non-hazardous work places and is a low-cost solution for non-hazardous dry particulates, dirt and grime. These environments include industrial facilities and pharmaceutical sites. It is the responsibility of the user to select garments which are appropriate for each intended use which meet all health, safety and regulation requirements.

Enviroguard #2012 Standard Coverall, elastic wrists, open ankles. Enviroguard 110NW-19
Bouffant Cap 19", White
110NW-21
Bouffant Cap 21", White
110NW-24
Bouffant Cap 24", White
112NW
Bread Restraint, White
Enviroguard #V3100-3XL Blue Anti-Skid Shoe covers. Enviroguard #3501 White Chlorinated Polyethylene (CPE) Shoe covers.
Enviroguard #3101-3XL Blue Standard Shoe covers. Enviroguard #2513Y XL
#2513Y 2XL

Yellow Latex Nuke Boots.
Enviroguard DuraGuard Sleeve Splash resistant heavy polyethylene coating over polypropylene, elastic both ends.

6500 White Duraguard 18"
6500-24 White Duraguard 24"
Enviroguard #5501
Polypropylene Sleeve, White, Elastic both ends, 18".


Dentec Safety Specialists, Inc.
100 Harry Walker Parkway North, Newmarket, ON L3Y 7B2
tel: 905-953-9946 • fax: 905-953-8351

e-mail: dentec@dentecsafety.com

Copyright © 2006-2012 Dentec Safety Specialists, Inc., All rights reserved.
JavaScript DHTML Drop Down Menu By Milonic